How to Create a Buffalo Plaid Deer Head Sign

How to Create a Buffalo Plaid Deer Head Sign

Cindy Bonnette from Vinyl Art
Studio in Pekin, IL is d
emonstrating this fully painted Buffalo Plaid Deer
Head Sign, painted on wood using a stencil to create the image. All products
used are Dixie Belle Paint Company!

Cindy Bonnette from Vinyl Art
Studio in Pekin IL! Demonstrating this fully painted Buffalo Plaid Deer Head
Sign, painted on wood using a stencil to create the image. All products used
are Dixie Belle Paint Company!

Honky Tonk Red

Caviar

Clear Coat Satin

With a single board of oak plywood, start out by
painting the background Cindy usually start with the edges. She is painting
with the Dixie Belle Blue Sponge because it smooths the paint out great, but
you can use a brush if you prefer. The paint doesnt need to be thick and
heavy, a nice even coat is all you need. Using Dixie Belles Honky Tonk Red
Cindy watered it down just a little bit, she likes to thin it down for the
background, but watering the paint down is optional.

Dixie Belle has great coverage; therefore, it
should take only one coat to cover the board. Working with a stencil is known
for having some bleeding issues, some of the steps we take are to alleviate
these issues the best we can, as much as possible.

Once we have the background is painted and dried,
use sand paper to scuff sand the surface this will help the stencil adhere and
helps to stop bleeding under the stencil. Now you can apply your stencil.


Cindy usually tapes the stencil in place, with
painters tape make a hinge on the top. The stencil is a single use stencil and
comes with an adhesive back, start by peeling the backing off. Smooth it down
and make sure it all of the stencil comes off the backing. Vinyl cutouts
usually have separate pieces, work with it gently and rolling it will help.
Once the backing is off smooth the stencil down onto the wood and peel the
front layer off the vinyl stencil. Once we get the stencil on our board, make
sure there is no bubbles around the edges of the stencil.


Put a coat of sealer down, use Dixie Belles Top
Coat in Satin. It does not take very much, a very very thin coat, a little goes
a long way. Dont panic if you make a mistake everything is touch-up-able!

Once the Clear Coat is dry paint a layer of Dixie
Belle Paint Color Caviar, work the paint on top of the stencil. This will take
2 coats of paint as well, just a few minutes under a fan will be dry enough for
a second coat. Once both coats are dry you can peel you stencil off.


You will see very nice crisp lines as you stencil
comes off, to see the deer head fully you must pick off all that extra vinyl
stickers. Peel off the little pieces in the design, make sure not to gouge or
scrape the wood. Usually we will put another thin coat of Top Coat to seal the
finished piece, but this is optional because Dixie Belle Paint doesnt not
require a finish! 


Share This Post
Leave a comment

Your email address will not be published. Required fields are marked *

4 × 5 =

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>